Will It Run AI

Can Phi 3.5 Mini 4B run on RX 6650 XT 8GB?

YES — With Q3_K_S

C50Usable
Estimated from fit model

Phi 3.5 Mini 4B needs ~9.5 GB VRAM. RX 6650 XT 8GB has 8.0 GB. With Q3_K_S quantization, expect ~35 tok/s.

Runtime: llama.cppCapacity: OffloadBandwidth: LowStack: StandardBottleneck: Host offload
Share:

Operating mode

Choose the run profile you care about

Interactive favors responsiveness, while light API and scale-out lean harder on serving readiness. The fit stays the same, but the recommendation lens changes.

Current mode

Balanced

Balanced for general local use. Keeps the ranking neutral across personal and serving workflows.

Phi 3.5 Mini 4B at Q4_K_M needs 10.0 GB — too much for RX 6650 XT 8GB (8.0 GB). Runs at Q3_K_S (9.5 GB) with low quality. 2 quantization levels fit.
Capabilities:

Select quantization to explore

Q4_K_M (Medium quality) — 10.0 GB, exceeds 8.0 GB available
10.0 GB required8.0 GB available
125% VRAM needed

2.0 GB over capacity — needs offload or smaller quantization

Fit status

Too heavy

Decode

27.4 tok/s

TTFT

7054 ms

Safe context

11K

Memory

10.0 GB / 8.0 GB

Offload

20%

Memory breakdown

Weights2.4 GB
KV Cache5.9 GB
Runtime0.9 GB
Headroom0.8 GB

See how fast it feels

With memory offload — actual speed may be lower
See how fast it feelsPhi 3.5 Mini 4B on RX 6650 XT 8GB
1st promptCold start — includes initialization
>What is local AI inference?
Local AI inference means running an AI language model directly on your own hardware — your laptop, desktop, or server — instead of sending requests to a remote cloud API. When you run inference locally the model weights are loaded into your GPU or unified memory. Each token you generate requires reading those weights from memory, so memory bandwidth is the main bottleneck for decode speed. Key benefits of running locally: - Full privacy: your prompts never leave your machine - No per-token cost or rate limits - Works offline once the model is downloaded - Latency depends only on your hardware
2nd promptWarm — model ready, no init overhead
>How much VRAM do I need?
It depends on the model size and quantization level. A rough rule of thumb: Model size Q4 (4-bit) Q8 (8-bit) FP16 7B params ~4.3 GB ~7.5 GB ~14 GB 13B params ~7.9 GB ~13.9 GB ~26 GB 70B params ~42.7 GB ~74.9 GB ~140 GB Most people use 4-bit quantization (Q4_K_M) which gives 90-95% of full quality at a fraction of the memory. A 24 GB GPU can comfortably run most 7B-13B models.
Estimated: 27.4 tok/s decode · 7.1s TTFT (warm) · 69 tok/s prefill

What limits this setup

It fits through host-memory offload, and offload is the main reason performance drops.

CPU or host-memory offload is active

About 20% of the working set spills out of accelerator memory, which usually hurts latency and sustained decode throughput.

Very little memory headroom

You can run the model, but there is not much room left for longer context, bigger batches, extra apps, or future model updates.

Best improvement path

Remove offload with more accelerator memory

Prioritize a GPU or unified-memory tier that fits the whole model natively. Removing offload usually helps more than small compute gains.

Buy headroom, not only minimum fit

A slightly larger memory tier gives you safer context growth and makes the recommendation more future-proof.

Increase host RAM if you keep offloading

This setup may need roughly 0.3 GB of extra host RAM just for the offloaded portion, before OS and other tools.

Performance by workload

WorkloadGradeFitDecodeTTFTContext
ChatBTight fit56.0 tok/s1886 ms11K
CodingFToo heavy27.4 tok/s7054 ms11K
Agentic CodingFToo heavy10.4 tok/s27089 ms11K
ReasoningFToo heavy27.4 tok/s8337 ms11K
RAGFToo heavy10.4 tok/s33861 ms11K

Quantization options

How Phi 3.5 Mini 4B (4B params) fits at each quantization level on RX 6650 XT 8GB (8.0 GB usable).

QuantBitsVRAMQualityFit
Q2_K
2
1.6 GB
LowB67
Q3_K_S
3
2.0 GB
LowB67
NVFP4
4
2.2 GB
MediumB68
Q4_K_M
4
2.4 GB
MediumB68
Q5_K_M
5
2.9 GB
HighB69
Q6_K
6
3.3 GB
HighB69
Q8_0Best for your GPU
8
4.3 GB
Very HighB69
F16
16
8.2 GB
MaximumF0

Get started

Copy-paste commands to run Phi 3.5 Mini 4B on your machine.

Run

ollama run phi3.5

升级选项

能流畅运行 Phi 3.5 Mini 4B 的硬件

RX 7600 XT 16GB经济之选
16 GB VRAM (+8)288 GB/s (+8)
A
Makes the model fit on the accelerator instead of staying completely out of reach.56 tok/s 解码

Makes the model fit on the accelerator instead of staying completely out of reach.

Removes host-memory offload, which is usually the single biggest latency and throughput win.

~$329 MSRP

RX 9060 XT 16GB最佳性价比
16 GB VRAM (+8)320 GB/s (+40)
A
Makes the model fit on the accelerator instead of staying completely out of reach.56 tok/s 解码

Makes the model fit on the accelerator instead of staying completely out of reach.

Removes host-memory offload, which is usually the single biggest latency and throughput win.

~$349 MSRP

RX 7700 XT 12GBAMD 升级
12 GB VRAM (+4)432 GB/s (+152)
B
Makes the model fit on the accelerator instead of staying completely out of reach.56 tok/s 解码

Makes the model fit on the accelerator instead of staying completely out of reach.

Removes host-memory offload, which is usually the single biggest latency and throughput win.

~$449 MSRP

Frequently asked questions

Can RX 6650 XT 8GB run Phi 3.5 Mini 4B?

Yes, RX 6650 XT 8GB can run Phi 3.5 Mini 4B at Q3_K_S quantization (Very compromised (needs ~0.3 GB host RAM)). The recommended Q4_K_M requires 10.0 GB which exceeds available memory, but at Q3_K_S it needs only 9.5 GB. Expected decode speed: 35.2 tok/s.

How much VRAM does Phi 3.5 Mini 4B need?

Phi 3.5 Mini 4B (4B parameters) requires approximately 10.0 GB at Q4_K_M quantization. On RX 6650 XT 8GB, it fits at Q3_K_S using 9.5 GB.

What is the best quantization for Phi 3.5 Mini 4B?

The recommended quantization is Q4_K_M, but on RX 6650 XT 8GB the best fitting quantization is Q3_K_S, which uses 9.5 GB.

What speed will Phi 3.5 Mini 4B run at on RX 6650 XT 8GB?

On RX 6650 XT 8GB, Phi 3.5 Mini 4B achieves approximately 35.2 tokens per second decode speed with a time-to-first-token of 5494ms using Q3_K_S quantization.

Can RX 6650 XT 8GB run Phi 3.5 Mini 4B for coding?

For coding workloads, Phi 3.5 Mini 4B on RX 6650 XT 8GB receives a F grade with 27.4 tok/s and 11K context.

What context window can Phi 3.5 Mini 4B use on RX 6650 XT 8GB?

On RX 6650 XT 8GB, Phi 3.5 Mini 4B can safely use up to 12K tokens of context at Q3_K_S quantization. The model's official context limit is 128K, but available memory constrains the safe maximum.

What should I upgrade first if Phi 3.5 Mini 4B feels slow on RX 6650 XT 8GB?

Remove offload with more accelerator memory. Prioritize a GPU or unified-memory tier that fits the whole model natively. Removing offload usually helps more than small compute gains.

See all results for RX 6650 XT 8GBSee all hardware for Phi 3.5 Mini 4B
Embed this result▼

Paste this snippet into any page to show a live fit card.

<iframe src="https://willitrunai.com/embed/phi-3.5-mini-4b-on-rx-6650-xt-8gb" width="400" height="180" frameborder="0" style="border:none;border-radius:12px;overflow:hidden;" title="Will It Run AI — fit result"></iframe>

Preview: